Skip to content
Manufacturing Consulting·4 min read

How a Manufacturing Consultant in Kenya Helps Improve Production Efficiency and Reduce Cost per Unit

Manufacturing consultant reviewing a rising production-efficiency chart with a supervisor on a Kenyan factory floor, with icons for time, cost, growth and quality leading to a map of Kenya

A plant head in Nairobi recently asked a simple question. Output has not grown this year, raw material prices have, and the finance team keeps asking why cost per unit will not come down. Where should she start?

Before buying new machines or pushing people harder, look at how the plant already spends its day. Most Kenyan factories have capacity they already own, sitting inside waiting time, rework, unplanned stops and messy changeovers. A manufacturing consultant in Kenya earns their fee by making that hidden capacity visible and recovering it with the people and equipment you already have.

Reality check

Where cost per unit really leaks

Cost per unit is a sum of small decisions. If an operator waits ten minutes for the next pallet, that time is still paid. If a machine runs slower than its rated speed because of a worn feeder, every piece carries more electricity and labour. If a quality issue sends part of the batch back for rework, those units carry their cost twice.

Kenya's manufacturing contribution to GDP stood at 7.1% in the latest KNBS Economic Survey, as energy, logistics and input costs squeezed margins. That pressure is not going away soon, so the margin has to be built from inside the plant.

Daily signals

What to record for a week before calling anyone

Before buying tools or consulting hours, write down what happens on your shop floor for five working days. A notebook is enough. Capture minutes lost to waiting (for material, people or instructions), the count and reason for each unplanned stop, planned-versus-actual changeover time, scrap and rework by shift and SKU, and any order that shipped late and why.

This simple record will show you the three or four problems that cause most of the cost leak. In most plants they are familiar — material not at the line, a slow changeover, a bottleneck no one has measured, or a quality check that happens too late.

Practical fixes

What helps most before fresh capex

Production efficiency usually improves in three places first. One, flow — move the bottleneck station, cut walking distance, or stage materials nearer the line. Two, standard work — a one-page method every operator follows the same way, with the right tools in reach. Three, changeovers — separate what can be done while the machine still runs from what needs it stopped. Each recovers minutes without buying anything.

Only after these are stable does a case for new equipment, a second shift, or new technology stand up. That sequence protects your capital.

Bringing help in

When a manufacturing consultant in Kenya pays off

Your internal team knows the plant best, but they are usually busy running it. A manufacturing consultant in Kenya is useful when you need a focused month on one problem, a fresh pair of eyes on a recurring loss, or support to standardise a method across plants. Look for people who will spend time on the shop floor itself, work alongside your supervisors, and leave behind a method your team owns rather than a slide deck.

For plants evaluating manufacturing consulting services in Kenya, judge the engagement by outcomes against a measured baseline, not activity. Hours of waiting removed, changeover time cut, scrap percentage down — these are the numbers that move cost per unit.

Want This Fixed in Your Plant?

Gemba Concepts works with manufacturers in Kenya and East Africa across consulting and technology deployment. A short shop-floor walkthrough is a sensible starting point.

Book a shop-floor walkthrough

Frequently asked questions

Trusted by Industry
500+

Industrial Businesses Across 3 Continents